The dyna case consists of 3 components:
1. Plug-in unit with roller shutter and spring shaft fitting
2. Clip-on cover profile
3. Guiding profiles with plastic guiding tracks
With just a few simple steps your furniture carcase turns into a functional roller shutter cabinet.
The plug-in unit includes:
A: Module with roller shutter and spring shaft fitting
B: Cover profile
C: System-guiding profiles contour or yankee
The dyna case is designed for our roller shutters made of real aluminium or decorative ABS plastic material.
For the use with dyna case, the aluminium and ABS plastic roller shutters can be equipped with locks from different manufacturers.
The use of locks has an impact on:
KNOKE roller shutters can be used with locks from the following producers:
Further producers upon request.
We prepare your roller shutters with handle borings upon request.
The roller shutter operates in front of the carcase, the guiding profiles have front thickness design.
The advantage: all side panels and shelves have the same dimensions as the remaining parts of the furniture.
Instead of complex special constructions the roller shutter cabinet obtains a simple standard carcase.
The guiding profiles of the front thickness system contour are available for panel thicknesses of 16 or 19 mm. Both versions are always flush with the cabinet side.
The front thickness guiding profiles are made of massive aluminium.
They are available in 3 different finishes:
The installation height of the dyna case is 155 mm with regards to 19 mm panel thickness. For 16 mm panel thickness 158 mm are required.
For cabinet heights more than 1500 mm the diameter of the wound roller shutter will be bigger than 155 mm. In this case the module rests on support rails at the side. Consequently the mobility of the wrapped up bale is always guaranteed.
The following displays will give you an overview.
The internal guiding profiles with their characteristic profile cross section in Y shape offer a clear visual alternative. They ensure an extensively flat appearance.
The typical areas of use apart from classic cabinets are e. g. applications such as pass-throughs, service areas or receptions.
The guiding profiles of the yankee system are available for panel thicknesses of 16 or 19 mm. Both versions are always flush with cabinet side.
The yankee guiding profiles are made of real aluminium.
They are available in 3 different finishes:
The possible dimensions depend on the used roller shutter type. They comply with those of the contour guiding profiles.
Due to the internal mounting position of the dyna case the minimum dimensions of the cabinet depth change.
The following displays will give you an overview.
Electrical operation of furniture roller shutters – It is easy, secure and almost silent.By means of the smart motion technology the roller shutter itself knows when it has to stop. It is able to find its end positions on its own and due to fast-stop-obstacle detection it reacts immediately.
smart motion – perfect safety and maximum convenience.
In order to suit individual applications KNOKE Beschlagtechnik offers the appropriate control option for the smart motion drive.
Depending on requirement the LED sensor field will be fitted into the right or left guiding profile.
Practical detail: The height of the sensor position can be selected at random. For high cabinets in particular, this solution provides ergonomic advantages for the operation at all times.
The handling via LED sensor is only available for the contour system.
The practical remote control can easily be carried on a key chain. The operation of the cabinet can take place from a distance without being directly at the cabinet.
The oval form of the remote control also offers the possibility to mill an appropriate recess at a suitable point. Therefore the remote control will be inserted flush-mounted down into the wood and will function just as a permanently attached switch.
With this control option you can comfortably operate your roller shutter cabinet when entering or leaving a room.
The radio transmitter completely hides in the flush-mounted box of a light switch rail. It is equipped with a frame for the switch programme Gira system 55. It can easily be changed. So the radio transmitter can be integrated within your personal switch programme.
If required the smart motion drive can be operated in many more ways such as:
Please talk to us about your personal smart motion drive.
It could hardly be more convenient: Simply start the automatic teach-in cycle after the installation. The motor automatically recognises its end positions and maintains these settings.
The smart motion drive continuously monitors its position. This is why it knows immediately if there is a fault. It responds with ligthning precision and releases the obstacle again. To keep your valuable items protected.
Special cabinet construction – no, thank you. The electrical drive does not require an additional modification of the cabinet.
In case of a power failure the roller shutter can still be moved manually by hand. Therefore important items inside the cabinet always remain accessible. And, of course, the smart motion control memorises all information that once has already been learned.
You would like to protect the cabinet contents from unauthorised access? The optional electronic locking makes it all possible. It automatically locks the roller shutter in closed position.
So even your dyna case with smart motion drive and electronic locking still remains a real dyna case.
And if you would rather provide your roller shutter with a manual lock – this is of course also possible.
